1 INTRODUCTION OF MAIN FUNCTION：
1.1 Using the intelligent multi-function CPU system，automatically identify the coin by material，thickness and diameter。
1.2 Can set up 3different value groups at the same time，every value set can program 15 coins。
1.3 Can at any time adjust to throw the accurate degree of the currency machine，in keeping with different amenity demand。
1.4 The product include software guard system，this guard system has alarm system，which prevent opportunistic behaviors。
1.5 Adjust the kinds of coins: RMB, Hongkong dollar, Australian dollar, US dollar, Euro dollar, Canadian dollar, Pound, Tai dollar, etc.
1.6 Can connect the counter。
1.7 It can su0pply digital byte output and make some modification in the output program according the demand。
2 SETTING INSTRUCTION OF PRODUCT
2.1 Turn the sensitive switch to stir to the “NOM”position （“MGN”position），then turn the
setting switch to stir to the “SET”position。LED display “00”（display“P2”）。
2.2 Adjust the coin value in turn and let the LED display the value which you needed。
2.3 Deposit the coins in turn，the more you can programming are 15coins。If less than 15 coins，can add and store later。
2.4 If need to set up the other value group’s coin after set up，then re-programming step 2 and step 3。If need exit ，set up the setting switch to the “START”position，then can use it。
2.5 When need to cancel all of the programmed coins，after finish step 1，LED display“00”，then keep press the coin adjust switch，you will be hear a “BI”sound and LED will display “C”，this moment is ok。
2.6 If need to cancel one of the different value groups，finish step 1 and step 2，keep press the coin adjust switch，you will be hear a “BI”sound and LED will display “C”，this moment is ok。
3 STANDARDS AND OPERATION INSTRUCTION
3.1 Apply to coin’s diameter：φ18mm-φ32mm。Apply to coin’s thickness：1.5mm-3.2mm。Work voltage：DC+12V±20%。Temperature：-20℃ - +50℃。
3.2 Operate with the game machine’s standard。Switch to the correct mode with N.O.（Normal Open）and N.C.（Normal Close）。Usually use Normal Open。
3.3 Switch to the correct speed（pulse）of coin machine。FAST：25ms（short pulse signal）。MEDIUM：45ms（medium pulse signal）。SLOW：65ms（long pulse signal by TIMER SWITCH for synchronizing with your machine）。
3.4 When the coin acceptor is used，the coin setting switch needs to be set correctly according to the coin that was selected。
3.5 The switch which for adjusting the coin’s value，can adjust the coin value when the coin programming。“00-99”means how many times of the output pulse signal will be sent when the programmed coin was deposited。“P2-P9”means a output pulse signal needs how many programmed coins to be deposited。
3.6 The switch for test the coin’s sensitive degree，it detects the difference between real/fake coin，when inserted。
3.7 Please turn on power about 10 minutes before using or setting，you can get the optimal effect。
3.8 Connecting instructions of connector：
Gray line
Red line
White line       COIN Signal        counter
Black line       GND （Ground）
Gray line